Galvanized Steel Profile
-
10 mm 20mm 30mm Q23512m Galvanized Steel Flat Bar
Galvanized flat steel refers to galvanized steel with a width of 12-300mm, a thickness of 4-60mm, a rectangular cross-section and slightly blunt edges. Galvanized flat steel can be finished steel, and can also be used as blanks for galvanized pipes and galvanized strips.
-
Standard Sizes Hot Dip A36-300W Galvanised Steel Angle Bar
Galvanized angle steel is divided into hot-dip galvanized angle steel and cold-dip galvanized angle steel. Hot-dip galvanized angle steel is also called hot-dip galvanized angle steel or hot-dip galvanized angle steel. The cold-dip galvanized coating mainly ensures the full contact between the zinc powder and the steel through the electrochemical principle, and generates an electrode potential difference for anti-corrosion.
-
Manufacture Q345 Cold Rolled Galvanized C Channel Steel
Galvanized C-shaped steel is a new type of steel made of high-strength steel plate, then cold-bent and roll-formed. Compared with traditional hot-rolled steel, the same strength can save 30% of the material. When making it, the given C-shaped steel size is used. C-shaped steel The forming machine automatically processes and forms. Compared with ordinary U-shaped steel, galvanized C-shaped steel can not only be preserved for a long time without changing its material, but also has relatively strong corrosion resistance, but its weight is also slightly heavier than the accompanying C-shaped steel. It also has a uniform zinc layer, smooth surface, strong adhesion, and high dimensional accuracy. All surfaces are covered by a zinc layer, and the zinc content on the surface is usually 120-275g/㎡, which can be said to be a super protective one.
-
High Grade Q345B 200*150mm Carbon Steel Welded Galvanized Steel H Beam for Construction
H – beam steel is a new economic construction. The section shape of H beam is economical and reasonable, and the mechanical properties are good. When rolling, each point on the section extends more evenly and the internal stress is small. Compared with ordinary I-beam, H beam has the advantages of large section modulus, light weight and metal saving, which can reduce the building structure by 30-40%. And because its legs are parallel inside and outside, the leg end is a right Angle, assembly and combination into components, can save welding, riveting work up to 25%.
H section steel is an economic section steel with better mechanical properties, which is optimized and developed from I-section steel. Especially, the section is the same as the letter “H”