Factory Direct Supply Slotted Galvanized Strut Channel Steel Unistrut HDG Gi Strut C Channel Steel Prices
Ground bracket: This kind of 4 Inch Steel Channel the solar panel directly on the ground, and realizes the integration of the ground and the bracket through special design. It is suitable for flat areas, large-scale solar photovoltaic power stations and buildings, and can withstand severe climatic conditions such as strong winds and heavy rains. It is widely used in agriculture, industrial parks and other scenes, as well as natural spaces such as woodlands and grasslands.
PRODUCT PRODUCTION PROCESS
PRODUCT SIZE
For use to support conduits, fixtures and ventilation systems from beams and other strutctural systems.
|
Product Name
|
Made in China Hot Dip Galvanized Steel Slotted Strut Channel ( C Channel With Hole, Unistrut, Uni Strut Channel)
|
|
Material
|
Q195/Q235/SS304/SS316/Aluminum
|
|
Thickness
|
1.5mm/2.0mm/2.5mm
|
|
Type
|
41*21,/41*41 /41*62/41*82mm with slotted or plain
|
|
Length
|
3m/3.048m/6m
|
|
Finished
|
Pre-galvanized/HDG/power coated
|
| No. | Size | Thickness | Type | Surface
Treatment |
||
| mm | inch | mm | Gauge | |||
| A | 41x21 | 1-5/8x13/16" | 1.0,1.2,1.5,2.0,2.5 | 20,19,17,14,13 | Slotted, Solid | GI,HDG,PC |
| B | 41x25 | 1-5/8x1" | 1.0,1.2,1.5,2.0,2.5 | 20,19,17,14,13 | Slotted, Solid | GI,HDG,PC |
| C | 41x41 | 1-5/8x1-5/8" | 1.0,1.2,1.5,2.0,2.5 | 20,19,17,14,13 | Slotted, Solid | GI,HDG,PC |
| D | 41x62 | 1-5/8x2-7/16" | 1.0,1.2,1.5,2.0,2.5 | 20,19,17,14,13 | Slotted, Solid | GI,HDG,PC |
| E | 41x82 | 1-5/8x3-1/4" | 1.0,1.2,1.5,2.0,2.5 | 20,19,17,14,13 | Slotted, Solid | GI,HDG,PC |
ADVANTAGE
The C-shaped steel has excellent mechanical properties and is highly practical. It has the following advantages:
1. Light weight.
Compared to concrete structures, it is lighter in weight. The overall load is reduced, the stress on the structure design is decreased, the foundation construction does not need to be so complex, the construction is more convenient, and a lot of costs can be saved.
2. Flexible design layout.
When the beam height is the same, the span of the steel structure can be twice as large as that of the concrete structure, making the later building layout and installation construction easier to arrange.
3. Strong seismic and impact resistance.
The steel structure built with hot-rolled C-shaped steel has reasonable force distribution, good toughness and plasticity, and a stable structure. It is suitable for buildings with frequent vibrations and impact loads, has strong disaster resistance, and is very suitable for areas with frequent earthquakes.
4. Larger usable area within the building.
The cross-section of the steel column is smaller than that of the concrete column, occupying less space. Depending on the architectural style, an additional 4% to 6% of usable area can be obtained.
5. More material and labor savings.
Compared to welded C-shaped steel, less material can be used and fewer labor resources are required. The raw materials and energy consumption are lower; the internal stress of the components is small, the surface is smooth, and the surface quality is good.
6. Convenient processing, disassembly and installation.
It is convenient for cutting, assembling and installing. It is simple to dismantle in the later stage, and the steel can be recycled and reused.
In addition, using C-shaped steel is also more environmentally friendly, mainly reflected in three aspects: First, it can be constructed in a dry manner, unlike the construction of concrete, where noise and dust will be much less; Second, because it is overall lightweight, the excavation volume for foundation construction is less, causing less damage to the land, which is conducive to environmental protection; Third, after the building reaches its service life, the generated waste is not much, and the value of steel recycling is very high.
PRODUCT INSPECTION
Ground brackets can be divided into two categories: underground Custom Steel C Channel and vertical photovoltaic brackets according to their structures. Underground photovoltaic brackets are suitable for large-scale solar photovoltaic power stations and other places, while upright photovoltaic brackets are suitable for areas with little undulating terrain, such as deserts and mountainous areas.
PROJECT
Royal Steel is a domestic supplier of galvanized C-shaped steel. If you want to inquire about the prices of various specifications of C-shaped steel, please trust us.
Our galvanized C-shaped steel has already been supplied to a large-scale solar energy project in South America. It was used for making photovoltaic brackets and designing supporting schemes for the project. A total of 15,000 tons of photovoltaic brackets were supplied. These brackets utilized domestic advanced new technologies, helping the local area develop photovoltaic power and improving the lives of local people. This project includes a solar power station with an approximate capacity of 6MW, along with a 5MW/2.5h energy storage station. The annual power generation is approximately 1200 units, and the overall equipment has stable photovoltaic conversion effects.
APPLICATION
Roof bracket: It is suitable for residential, commercial buildings and other places. It can install photovoltaic modules on the roof without occupying ground space.
Applicable scenarios for photovoltaic brackets
1. Roof installation
PV brackets can be installed on both flat and sloping roofs. The photovoltaic supports on the roof need to be selected based on the size of the roof, its load-bearing capacity and the roof inclination angle. For instance, for small-scale photovoltaic power stations, compact and easy-to-assemble supports of medium and small sizes are usually chosen.
2. Ground installation
The ground-mounted photovoltaic supports usually need to be selected based on the local terrain and slope conditions. Moreover, the scale of most ground-based photovoltaic projects is relatively large. However, the angles of the ground-mounted photovoltaic supports can be adjusted, which facilitates subsequent operation and maintenance.
3. Water surface installation
Water surface PV is usually built on lakes or reservoirs. Such projects have a large area, and the materials used for the brackets must be corrosion-resistant and have good waterproof properties to adapt to the complex environment in water.
PACKAGING AND SHIPPING
This batch of photovoltaic supports has been packed, neatly bundled, and wrapped with protective film to prevent scratches and bumps during transportation. After the goods have been counted, they are loaded into the container. The container is arranged neatly to make full use of the space inside. We have been closely monitoring the loading process and ensuring proper fixation to guarantee that the goods are safely delivered to the customers.
COMPANY STRENGTH
Made in China, with reliable quality and excellent service, our products are sold all over the world.
1. Scale advantage: We have our own large steel mills, with a well-established supply chain. We have advantages in both procurement and transportation, and we handle production and supporting services all in one.
2. Wide range of products: We offer a variety of steel types, and you can usually find the steel you need here. Our main products include steel structures, rails, steel sheet piles, photovoltaic supports, channel steel, silicon steel coils, etc. It's easy to select and meet the needs of different projects.
3. Stable supply: Our production lines and supply chain are mature and stable, ensuring reliable supply. This is very important for customers who purchase steel in large quantities.
4. Brand strength: We have a certain reputation in the industry and have a wide market channel.
5. Comprehensive services: We can provide customized, production, and logistics delivery services.
6. Price advantage: The prices are reasonable and the cost performance is good.
CUSTOMERS VISIT
FAQ
1. How can I inquire about the price from you?
You can simply leave a message for us and we will reply to each message promptly.
2. Can the goods be delivered on time?
Of course
3. Can we have samples before placing an order?
Yes, samples are generally provided free of charge. We can also produce according to the samples you provide or the drawings you give.
4. Do you support third-party inspections?
It is fully acceptable to have third-party testing.
5. How can we trust your company?
We have been deeply involved in the steel industry for many years and are a reliable supplier. Our company headquarters is located in Tianjin. You are welcome to visit us in various ways.











