Steel Profile
-
High Strength Structural Customized 6 inch 8 inch Hot Rolled Steel H Beam
H-shaped steel is an economical, high-efficiency profile with optimized cross-sectional area distribution and a more reasonable strength-to-weight ratio. It gets its name from its cross-section resembling the letter “H.” Because its components are arranged at right angles, H-shaped steel offers advantages such as strong bending resistance in all directions, simple construction, cost savings, and lightweight structures, making it widely used.
-
Hot-Rolled JIS/ASTM Standard 6m 10m Steel H Beam for Construction
H-beam steel, a type of steel with an H-shaped cross-section, is commonly used in structural construction due to its excellent strength, stability, and resistance to deformation. Also known as I-beam or I-shaped steel, H-beam steel is widely used in buildings, bridges, machinery, and other fields, and is particularly well-suited for load-bearing and frame structures.
-
ASTM A36 / A53 / Q235 / Q345 Carbon Steel Equal Angle Bar – Galvanized Mild Steel (V-Shaped)
ASTM Equal Angle Steel commonly known as angle iron, is a long steel with two sides perpendicular to each other.
Equal and Unequal Angle Steel:
-
Equal Angle Steel: Both legs are of equal width. Specifications are expressed as side width × side width × thickness in mm, e.g., ∟30 × 30 × 3 (30 mm width, 3 mm thickness).
-
Model Reference: Sometimes expressed in cm, e.g., ∟3 × 3, but this does not indicate thickness. Always specify both leg width and thickness in contracts and documents.
-
Standard Hot-Rolled Sizes: Equal leg angle steel ranges from 2 × 3 mm to 20 × 3 mm.
-
-
HEA HEB HEM H Beam H Shaped Steel Beam – European Wide Flange Beams
HEA, HEB, and HEM are designations for European standard IPE (I-beam) sections.
-
Good Quality Hot Rolled Carbon U Beam C Channel Steel Black Iron Upn Channel
Current table represents European standard U (UPN, UNP) channels,
Specifications, properties, and dimensions of UPN beams, manufactured according to the following standards:
-
DIN 1026-1:2000
-
NF A 45-202:1986
-
EN 10279:2000 – Tolerances
-
EN 10163-3:2004 – Surface condition, Class C, Subclass 1
-
STN 42 5550
-
ČTN 42 5550
-
TDP: STN 42 0135
-
-
Best Price Prime Quality 50*50 Q235 A36 5mm Thickness Hot-Dip Galvanized Carbon Steel Angles Equal ASTM Grade 50 Bending
Galvanized angle steel is divided into hot-dip galvanized angle steel and cold-dip galvanized angle steel. Hot-dip galvanized angle steel is also called hot-dip galvanized angle steel or hot-dip galvanized angle steel. The cold-dip galvanized coating mainly ensures the full contact between the zinc powder and the steel through the electrochemical principle, and generates an electrode potential difference for anti-corrosion.
-
ASTM A36 Angle Bar Low Carbon Steel
ASTM Equal Angle Steel commonly known as angle iron, is a long steel with two sides perpendicular to each other. There are equal angle steel and unequal angle steel.The width of two sides of an equal angle steel is equal. The specification is expressed in mm of side width × side width × side thickness. Such as “∟ 30 × 30 × 3″, that is to say, equal angle steel with side width of 30mm and side thickness of 3mm. It can also be expressed by model. The model is the centimeter of the side width, such as ∟ 3 × 3. The model does not represent the dimensions of different edge thicknesses in the same model, so the edge width and edge thickness dimensions of angle steel shall be filled in completely in the contract and other documents to avoid using the model alone. The specification of hot rolled equal leg angle steel is 2 × 3-20 × 3.