Want to know more about the specifications and dimensions of steel sheet piles?
GB Hot Rolled Q235B U & Z Type Steel Sheet Pile
Product Detail
| Standard | GB | Width | 200mm – 900mm (Depending on Profile) |
| Grade | Q235B / Q355B | Thickness | 4mm – 12mm |
| Type | U-Type / Z-Type / Larssen Sheet Piles | Surface | Mill Finish / Coated / Galvanized |
| Manufacturing | Hot-rolled Steel Sheet Pile | Ready Stock | 1000+ Tons Available |
| Length | 6m – 18m (Custom Length Available) | Delivery | Factory Direct Price, 7–15 Days |
Q235B/Q355B Steel Sheet Pile Chemical Composition
| Grade | C | Mn | P | S | Si |
| Q235B | ≤0.22 | ≤1.40 | ≤0.035 | ≤0.035 | ≤0.35 |
| Q355B | ≤0.20 | 1.00–1.60 | ≤0.035 | ≤0.035 | ≤0.50 |
Q235B/Q355B Steel Sheet Pile Mechanical Properties
| Grade | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation (%) |
| Q235B | ≥235 | 375 – 500 | ≥26 |
| Q345B | ≥355 | 470 – 630 | ≥21 |
Notes:
Yield Strength ReH = Yield Strength
Tensile Strength Rm = Tensile Strength
Elongation A = Elongation (percentage elongation after fracture)
Q235B/Q355B Steel Sheet Pile Size
Asia Type Hot Rolled Sheet Piling Types
Europe Larssen sheet pile
Asia Type Hot Rolled Sheet Piling Types
| ection | Dimensions | Sectional Area | Mass | Moment of inertia |
Modulus of section |
|||
| Width | Height | Thickness | Pile | Wall | ||||
| w | h | t | ||||||
| mm | Mm | mm | cm2/pile | kg/m | kg/m2 | cm4/m | cm3/m | |
| ⅠA | 400 | 85 | 8 | 45.21 | 35.5 | 88.8 | 4500 | 529 |
| Ⅱ | 400 | 100 | 10.5 | 61.2 | 48 | 120 | 8740 | 874 |
| Ⅲ | 400 | 125 | 13 | 76.4 | 60 | 150 | 16800 | 1340 |
| ⅢA | 400 | 150 | 13.1 | 74.4 | 58.4 | 146 | 22800 | 1520 |
| Ⅳ | 400 | 170 | 15.5 | 97 | 76.1 | 190 | 38600 | 2270 |
| ⅤL | 500 | 200 | 24.3 | 133.8 | 105 | 210 | 63000 | 3150 |
| ⅥL | 500 | 225 | 27.6 | 153 | 120 | 240 | 86000 | 3820 |
| ⅡW | 600 | 130 | 10.3 | 78.7 | 61.8 | 103 | 13000 | 1000 |
| ⅢW | 600 | 180 | 13.4 | 104 | 81.6 | 136 | 32400 | 1800 |
| ⅣW | 600 | 210 | 18 | 135.3 | 106 | 177 | 56700 | 2700 |
Europe Larssen sheet pile
| Section | Dimensions | Mass | Moment of inertia | Modulus of section | ||||
| Width | Height | Thickness | Per pile | Wall | ||||
| w | h | t | s | |||||
| mm | mm | mm | mm | kg/m | kg/m2 | cm4/m | cm3/m | |
| 750mm wide | ||||||||
| GHU 14 | 750 | 408 | 10.0 | 8.3 | 77.9 | 104 | 28 690 | 1 415 |
| GHU 16 | 750 | 411 | 11.5 | 9.3 | 86.3 | 115 | 32 860 | 1 610 |
| GHU 18 | 750 | 441 | 10.5 | 9.1 | 88.5 | 118 | 39 310 | 1 790 |
| GHU 20 | 750 | 444 | 12.0 | 10.0 | 96.9 | 129 | 44 450 | 2 010 |
| GHU 23 | 750 | 447 | 13.0 | 9.5 | 102.1 | 136 | 50 710 | 2 280 |
| GHU 25 | 750 | 450 | 14.5 | 10.2 | 110.4 | 147 | 56 250 | 2 510 |
| 600mm wide | ||||||||
| GHU 12 | 600 | 360 | 9.8 | 9.0 | 66.1 | 110 | 21 610 | 1 210 |
| GHU 12S | 600 | 360 | 10.0 | 10.0 | 71.0 | 118 | 22 670 | 1 270 |
| GHU 18-1 | 600 | 430 | 10.2 | 8.4 | 72.6 | 121 | 35 960 | 1 680 |
| GHU 18 | 600 | 430 | 11.2 | 9.0 | 76.9 | 128 | 38 660 | 1 810 |
| GHU 18+1 | 600 | 430 | 12.2 | 9.5 | 81.1 | 135 | 41 330 | 1 930 |
| GHU 22-1 | 600 | 450 | 11.1 | 9.0 | 81.9 | 137 | 46 390 | 2 070 |
| GHU 22 | 600 | 450 | 12.1 | 9.5 | 86.1 | 144 | 49 470 | 2 210 |
| GHU 22+1 | 600 | 450 | 13.1 | 10.0 | 90.4 | 151 | 52 520 | 2 345 |
| GHU 28-1 | 600 | 452 | 14.2 | 9.7 | 97.4 | 162 | 60 590 | 2 690 |
| GHU 28 | 600 | 454 | 15.2 | 10.1 | 101.8 | 170 | 64 470 | 2 850 |
| GHU 28+1 | 600 | 456 | 16.2 | 10.5 | 106.2 | 177 | 68 390 | 3 010 |
| GHU 32-1 | 600 | 452 | 18.5 | 10.6 | 109.9 | 183 | 69 220 | 3 075 |
| GHU 32 | 600 | 452 | 19.5 | 11.0 | 114.1 | 190 | 72 330 | 3 210 |
| GHU 32+1 | 600 | 452 | 20.5 | 11.4 | 118.4 | 197 | 75 410 | 3 350 |
| 600mm and 400mm wide | ||||||||
| GHU 6N | 600 | 309 | 6.0 | 6.0 | 41.9 | 70 | 9 680 | 635 |
| GHU 7N | 600 | 310 | 6.5 | 6.4 | 44.1 | 74 | 10 460 | 685 |
| GHU 7S | 600 | 311 | 7.2 | 6.9 | 46.3 | 77 | 11 550 | 750 |
| GHU 7HWS | 600 | 312 | 7.3 | 6.9 | 47.4 | 79 | 11 630 | 755 |
| GHU 8N | 600 | 312 | 7.5 | 7.1 | 48.5 | 81 | 12 020 | 780 |
| GHU 8S | 600 | 313 | 8.0 | 7.5 | 50.8 | 85 | 12 810 | 830 |
| GHU 10N | 600 | 316 | 9.0 | 6.8 | 55.8 | 93 | 15 710 | 1000 |
| GHU 11N | 600 | 318 | 10.0 | 7.4 | 60.2 | 100 | 17 460 | 1 105 |
| GHU 12N | 600 | 320 | 11.0 | 8.0 | 64.6 | 108 | 19 230 | 1 230 |
| GHU 13N | 600 | 418 | 9.0 | 7.4 | 59.9 | 100 | 26 600 | 1 280 |
| GHU 14N | 600 | 420 | 10.0 | 8.0 | 64.3 | 107 | 29 420 | 1 410 |
| GHU 15N | 600 | 422 | 11.0 | 8.6 | 68.7 | 115 | 32 270 | 1 540 |
| GHU 16N | 600 | 430 | 10.2 | 8.4 | 72.6 | 121 | 35 960 | 1 680 |
| GHU 18N | 600 | 430 | 11.2 | 9.0 | 76.9 | 128 | 38 660 | 1 810 |
| GHU 20N | 600 | 430 | 12.2 | 9.5 | 81.1 | 135 | 41 310 | 1 930 |
| GHU 21N | 600 | 450 | 11.1 | 9.0 | 81.9 | 137 | 46 390 | 2 070 |
| GHU 22N | 600 | 450 | 12.1 | 9.5 | 86.1 | 144 | 49 470 | 2 210 |
| GHU 23N | 600 | 450 | 13.1 | 10.0 | 90.4 | 151 | 52 520 | 2 345 |
| GHU 27N | 600 | 452 | 14.2 | 9.7 | 97.4 | 162 | 60 590 | 2 690 |
| GHU 28N | 600 | 454 | 15.2 | 10.1 | 101.8 | 170 | 64 470 | 2 850 |
| GHU 30N | 600 | 456 | 16.2 | 10.5 | 106.2 | 177 | 68 390 | 3 010 |
| GHU 31N | 600 | 452 | 18.5 | 10.6 | 109.9 | 183 | 69 220 | 3 075 |
| GHU 32N | 600 | 452 | 19.5 | 11.0 | 114.1 | 190 | 72 330 | 3 210 |
| GHU 33N | 600 | 452 | 20.5 | 11.4 | 118.4 | 197 | 75 420 | 3 350 |
| GHU 16-400 | 400 | 290 | 12.7 | 9.4 | 62.0 | 155 | 22 600 | 1 570 |
| GHU 18-400 | 400 | 292 | 15.0 | 9.7 | 69.3 | 173 | 26 100 | 1 795 |
| Section | Dimensions | Mass | Moment of inertia | Modulus of section | ||||
| Width | Height | Thickness | Per pile | Wall | ||||
| w | h | t | s | |||||
| mm | mm | mm | mm | kg/m | kg/m2 | cm4/m | cm3/m | |
| GHL 600 | 600 | 150 | 9.5 | 9.5 | 56.4 | 94 | 3825 | 510 |
| GHL 600K | 600 | 150 | 10 | 10 | 59.4 | 99 | 4050 | 540 |
| GHL 601 | 600 | 310 | 7.5 | 6,4 | 46.8 | 78 | 11520 | 745 |
| GHL 602 | 600 | 310 | 8.2 | 8 | 53.4 | 89 | 12870 | 830 |
| GHL 603 | 600 | 310 | 9.7 | 8.2 | 64.8 | 108 | 18600 | 1200 |
| GHL 603K | 600 | 310 | 10 | 9 | 68.1 | 113.5 | 19220 | 1240 |
| GHL 603 10/10 | 600 | 310 | 10 | 10 | 69.6 | 116 | 19530 | 1260 |
| GHL 604 | 600 | 380 | 10 | 9 | 73.8 | 123 | 30400 | 1600 |
| GHL 605 | 600 | 420 | 13 | 9.2 | 85.5 | 142.5 | 43890 | 2090 |
| GHL 606 | 600 | 435 | 14.4 | 9.2 | 94.2 | 157 | 54375 | 2500 |
| GHL 607 | 600 | 452 | 19 | 10.6 | 114 | 190 | 72320 | 3200 |
| GHL 703 | 700 | 400 | 9.5 | 8 | 67.5 | 96.4 | 24200 | 1210 |
| GHL 716 | 700 | 440 | 10.2 | 9.5 | 79.9 | 114.2 | 35200 | 1600 |
| GHL 720 | 750 | 450 | 12 | 10 | 96.4 | 128.5 | 45000 | 2000 |
Q235B/Q355B Steel Sheet Pile Locking and waterproof performance
Design: Interlocking Steel Sheet Pile, permeability ≤1×10⁻⁷ cm/s
Americas: Meets ASTM D5887 Standard for a Liner to Reduce Seepage Under Drums
Southeast Asia: Groundwater-seepage proof for tropical rainy seasons
Q235B/Q355B Steel Sheet Pile Production process
1. Raw Material Preparation: Steel billets (Q235B, Q355B) are heated to 1100–1250°C before rolling.
2. Rough Rolling: The billets are rolled to reduce thickness and form the basic shape.
3. Finish Rolling (Key Step): Using specialized rolling mills, the steel is formed into U type or Z type sheet piles, including the interlock structure in one process.
4. Cooling & Straightening: Controlled cooling ensures strength, followed by straightening for dimensional accuracy.
5. Cutting to Length: Standard lengths: 6m, 9m, 12m, up to 24m, or customized.
6. Surface Treatment (Optional)
Black (original)
Hot-dip galvanized
Epoxy coating (for marine use)
7. Inspection & Packaging: Final inspection includes size, mechanical properties, and interlock fit.
Q235B/Q355B Steel Sheet Pile Surface
Americas:HDG as ASTM A123 (min zinc coat ≥ 85 µm); 3PE coating is optional; all finishes RoHS compliant.
Southeast Asia:Hot-dip galvanizing (≥100μm) combined with dual epoxy coal tar coating ensures over 5000 hours of salt spray resistance, making it ideal for tropical marine environments.
APPLICATION
Harbor Construction: Employed for use in harbors, docks, and quays, it offers high structural strength and sustainability in marine environment.
River Protection: For riverbank stabilization, erosion control and water flow and flood resistance.
Bridge Foundations: Great for deep foundation systems and stability in heavy structural loading.
Underground Structures: Used in basements, tunnels and other subterranean works, it enables secure soil retention and excavation support.
Why Choose China Royal Steel for Steel Sheet Piles
1. Large Ready Stock
Over 1000+ tons of sheet piles available for immediate delivery, reducing your project lead time.
2. Fast Delivery
Efficient production and logistics ensure 7–15 days delivery for most standard orders.
3. Global Export Experience
Successfully supplied to Southeast Asia, Central & South America, and the Middle East, with strong project support.
4. Multiple Standards Available
Products comply with GB and EN standards, meeting diverse international project requirements.
5. Strict Quality Control
Full inspection before shipment, with support for third-party testing (SGS, BV).
6. Custom Solutions
Customized sizes, lengths, and anti-corrosion coatings based on your project needs.
7. Professional Technical Support
Engineering team provides selection guidance, drawings, and application solutions.
PACKAGING AND SHIPPING
The steel sheet piles are tightly bundled with high strength steel strap and adequate protection is applied to guarantee the safety in the long distance transportation. End caps or protective wrapping sleeves for additional protection are also available upon request, ideal for ocean shipping and heavy-duty handling.
We provide flexible shipping options such as loading into containers and bulk vessel shipping. Lead time is normally 7-15 days for stock goods, 20-35 days for customized goods. We have rich experience in export which can make global shipment smoothly and full documents in your hand.
FAQ
Q1: What is the difference between Q235B and Q355B sheet pile?
A: Q355B has higher strength and is suitable for heavy-duty and permanent structures.
Q2: What type should I choose, U or Z?
A: U type is cost-effective, while Z type provides better structural performance.
Q3: Can you supply long length sheet piles?
A: Yes, we can supply up to 24m or customized lengths.
Q4: Do you provide coating for marine projects?
A: Yes, galvanizing and epoxy coatings are available.
Write your message here and send it to us
