EN10248 High Quality 6m 9m 12m Hot Rolled Steel Sheet Pile Piling Sheet Z Type Sheet Pile for Civil Construction
PRODUCT SIZE
PRODUCT DESCRIPTION
The height (H) of Z-shaped steel sheet pile usually ranges from 200mm to 600mm.
The width (B) of Q235b sheet pile usually ranges from 60mm to 210mm.
The thickness (t) of Z-shaped steel sheet piles usually ranges from 6mm to 20mm.
*Send the email to [email protected] to get a quotation for your projects
| Section | Width | Height | Thickness | Cross Sectional Area | Weight | Elastic Section Modulus | Moment of Inertia | Coating Area (both sides per pile) | ||
|---|---|---|---|---|---|---|---|---|---|---|
| (w) | (h) | Flange (tf) | Web (tw) | Per Pile | Per Wall | |||||
| mm | mm | mm | mm | cm²/m | kg/m | kg/m² | cm³/m | cm4/m | m²/m | |
| CRZ12-700 | 700 | 440 | 6 | 6 | 89.9 | 49.52 | 70.6 | 1,187 | 26,124 | 2.11 |
| CRZ13-670 | 670 | 303 | 9.5 | 9.5 | 139 | 73.1 | 109.1 | 1,305 | 19,776 | 1.98 |
| CRZ13-770 | 770 | 344 | 8.5 | 8.5 | 120.4 | 72.75 | 94.5 | 1,311 | 22,747 | 2.2 |
| CRZ14-670 | 670 | 304 | 10.5 | 10.5 | 154.9 | 81.49 | 121.6 | 1,391 | 21,148 | 2 |
| CRZ14-650 | 650 | 320 | 8 | 8 | 125.7 | 64.11 | 98.6 | 1,402 | 22,431 | 2.06 |
| CRZ14-770 | 770 | 345 | 10 | 10 | 138.5 | 83.74 | 108.8 | 1,417 | 24,443 | 2.15 |
| CRZ15-750 | 750 | 470 | 7.75 | 7.75 | 112.5 | 66.25 | 88.34 | 1,523 | 35,753 | 2.19 |
| CRZ16-700 | 700 | 470 | 7 | 7 | 110.4 | 60.68 | 86.7 | 1,604 | 37,684 | 2.22 |
| CRZ17-700 | 700 | 420 | 8.5 | 8.5 | 132.1 | 72.57 | 103.7 | 1,729 | 36,439 | 2.19 |
| CRZ18-630 | 630 | 380 | 9.5 | 9.5 | 152.1 | 75.24 | 119.4 | 1,797 | 34,135 | 2.04 |
| CRZ18-700 | 700 | 420 | 9 | 9 | 139.3 | 76.55 | 109.4 | 1,822 | 38,480 | 2.19 |
| CRZ18-630N | 630 | 450 | 8 | 8 | 132.7 | 65.63 | 104.2 | 1,839 | 41,388 | 2.11 |
| CRZ18-800 | 800 | 500 | 8.5 | 8.5 | 127.2 | 79.9 | 99.8 | 1,858 | 46,474 | 2.39 |
| CRZ19-700 | 700 | 421 | 9.5 | 9.5 | 146.3 | 80.37 | 114.8 | 1,870 | 39,419 | 2.18 |
| CRZ20-700 | 700 | 421 | 10 | 10 | 153.6 | 84.41 | 120.6 | 1,946 | 40,954 | 2.17 |
| CRZ20-800 | 800 | 490 | 9.5 | 9.5 | 141.2 | 88.7 | 110.8 | 2,000 | 49,026 | 2.38 |
Section Modulus Range
1100-5000cm3/m
Width Range (single)
580-800mm
Thickness Range
5-16mm
Production Standards
BS EN 10249 Part 1 & 2
Steel Grades
S235JR, S275JR, S355JR, S355JO
ASTM A572 Gr42, Gr50, Gr60
Q235B, Q345B, Q345C, Q390B, Q420B
Others available on request
Length
35.0m maximum but any project specific length can be produced
Delivery Options
Single or Pairs
Pairs either loose, welded or crimped
Lifting Hole
Grip Plate
By container (11.8m or less) or Break Bulk
Corrosion Protection Coatings
|
Product Name
|
|||
|
MOQ
|
25 Ton
|
||
|
Standard
|
AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc.
|
||
|
Length
|
1-12m or as Your Requirement
|
||
|
Width
|
20-2500 mm or as Your Requirement
|
||
|
Thickness
|
0.5 - 30 mm or as Your Requirement
|
||
|
Technique
|
Hot rolled or cold rolled
|
||
|
Surface Treatment
|
Clean, blasting and painting according to customer requirement
|
||
|
Thickness tolerance
|
±0.1mm
|
||
|
Material
|
Q195; Q235(A,B,C,D R); Q345(B,C,D R); Q345QC Q345QD SPCC SPCD SPCD SPCE ST37 ST12 ST15 DC01 DC02 DC03 DC04 DC05 DC06 20#- 35# 45#
50#, 16Mn-50Mn 30Mn2-50Mn2 20Cr, 20Cr, 40Cr 20CrMnTi 20CrMo;15CrMo;30CrMo 35CrMo 42CrMo; 42CrMo4 60Si2mn 65mn 27SiMn ;20Mn; 40Mn2; 50Mn; 1cr13 2cr13 3cr13 -4Cr13; |
||
|
Application
|
It is widely used in small tools, small components, iron wire, siderosphere, pull rod, ferrule, weld assembly, structural metal,
connecting rod, lifting hook, bolt, nut, spindle, mandrel, axle, chain wheel, gear, car coupler. |
||
|
Export packing
|
Waterproof paper, and steel strip packed.Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
|
||
|
Application
|
Shipbuilding,marine steel plate
|
||
|
Certificates
|
ISO,CE
|
||
|
Delivery Time
|
Usually within 10-15 days after receipt of advance payment
|
||
FEATURES
The interlocking structure of the outer fibers optimizes the cross-sectional profile, achieving high strength and low material weight.
High inertia reduces deflection and improves performance.
High steel grade provides an efficient cross-section with high bending moment resistance.
Uniform cross-sectional thickness ensures good driving stiffness.
The system is wider than standard sheet piles. This greater width reduces handling and installation time using conventional driving equipment.
The greater width reduces the number of interlocks per meter of wall length, directly improving the wall's waterproofing.
APPLICATION
Z steel sheet piles have a wide range of applications in civil engineering and construction. Some common applications include:
The steel sheet pile is very wide, in the permanent structure of the building, can be used for wharf, unloading yard, embankment revetment, wall, retaining wall, breakwater, diversion embankment, dock, gate, etc.; In temporary structures, can be used to seal the mountain, temporary shore expansion, cut-off, bridge cofferdam, large pipeline laying temporary ditch excavation retaining, water, sand, and so on; In flood fighting, it can be used for flood control, collapse prevention, sand and so on.
![0$NU_O5TD8Y4}`E3UXEVP]2](http://www.chinaroyalsteel.com/uploads/0NU_O5TD8Y4E3UXEVP2.jpg)
PACKAGING AND SHIPPING
Packaging:
Securely stack the sheet piles: Stack the Z-shaped sheet piles neatly and securely, ensuring they are properly aligned and prevent any instability. Use strapping or tying tape to secure the sheet piles to prevent them from shifting during transport.
Use protective packaging: Wrap the sheet piles in moisture-proof material (such as plastic or waterproof paper) to protect them from water, moisture, and other environmental factors. This helps prevent rust and corrosion.
Transportation:
Choose the appropriate transportation method: Based on the quantity and weight of the sheet piles, select an appropriate transportation method, such as a flatbed truck, container, or ship. Consider factors such as transportation distance, time, cost, and any relevant regulatory requirements.
Use appropriate lifting equipment: When loading and unloading U-shaped sheet piles, use appropriate lifting equipment, such as a crane, forklift, or loader. Ensure that the equipment has sufficient capacity to safely handle the weight of the sheet piles.
Secure the load: Secure the packaged sheet pile stack to the transport vehicle using strapping, bracing or other suitable means to prevent shifting, sliding or falling during transport.
PRODUCT PRODUCTION PROCESS
The production process of cold-formed steel sheet pile usually includes the following steps:
Material preparation: Select steel plate materials that meet the requirements, usually hot-rolled or cold-rolled steel plates, and select materials according to design requirements and standards.
Cutting: Cut the steel plate according to the design requirements to obtain a steel plate blank that meets the length requirements.
Cold bending: The cut steel plate blank is sent to the cold bending forming machine for forming processing. The steel plate is cold-bent into a Z-shaped cross-section through processes such as rolling and bending.
Welding: Weld the cold-formed Z-shaped steel sheet piles to ensure that their connections are firm and defect-free.
Surface treatment: Surface treatment is performed on the welded Z-shaped steel sheet piles, such as rust removal, painting, etc., to improve its anti-corrosion performance.
Inspection: Conduct quality inspection on the produced cold-formed Z-shaped steel sheet piles, including inspection of appearance quality, dimensional deviation, welding quality, etc.
Packaging and leaving the factory: The qualified cold-formed Z-shaped steel sheet piles are packaged, marked with product information, and shipped out of the factory for storage.
*Send the email to [email protected] to get a quotation for your projects
CUSTOMER VISIT PROCESS
When a customer wishes to visit a product, the following steps can usually be arranged:
Make an appointment to visit: Customers can contact the manufacturer or sales representative in advance to make an appointment for the time and place to visit the product.
Arrange a guided tour: Arrange professionals or sales representatives as tour guides to show customers the production process, technology and quality control process of the product.
Display products: During the visit, show products at different stages to customers so that customers can understand the production process and quality standards of the products.
Answer questions: During the visit, customers may have various questions, and the tour guide or sales representative should answer them patiently and provide relevant technical and quality information.
Provide samples: If possible, product samples can be provided to customers so that customers can more intuitively understand the quality and characteristics of the product.
Follow-up: After the visit, promptly follow up on customer feedback and needs to provide customers with further support and services.
ROYAL STEEL Advantages
Choosing our China-made steel sheet piling and shoring solutions guarantees quality and durability. We are China Az Sheet Pile Supplier.Our sheet piles are manufactured to the highest standards, ensuring they can withstand the rigors of any construction environment.
Quality and Durability
Our commitment to quality means our sheet piles and shoring products are built to last. They are corrosion-resistant, withstand high bending moments, and maintain integrity under heavy loads. This provides a strong and reliable foundation for your construction project.
Excellent Customer Service and Support
We understand the importance of support throughout the construction process. Therefore, we offer exceptional customer service and expert guidance during sheet pile and shoring design and installation. Our team, including our in-house engineering team, is dedicated to providing you with the best shoring solution to ensure your project's success.We can provide all the sizes you need, including Az Sheet Pile Dimensions, Pz Sheet Pile Dimensions, Nz Sheet Pile Dimensions.
FAQ
Q: Are you trading company or manufacturer ?
A: We are manufacturer, with own warehouse and trading company.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or 15-20 days if the goods are not in stock, according to order quantity.
Q: Do you provide samples ? Is it free or extra cost?
A: Yes, we provide the sample for free, customer affords freight charge.
Q: What about your MOQ?
A: 1 Ton is acceptable, 3-5 Tons for customized product.
Products categories
-
AREMA Standard Steel Rail Light Rails Coal Mine...
-
Long Service Life Precast Sheet Piling for Ret...
-
Steel Structure Building Structure Steel Indust...
-
Photovoltaic Bracket Earthquake Resistant Brack...
-
China Hot Selling Cheap Price 9m 12m Length s35...
-
China Supplier Offers Price Concessions For All...