Want to know more about the specifications and dimensions of steel sheet piles?
Larssen Steel Sheet Pile | Type II, III, IV | 400mm-600mm Width | High Strength Carbon Steel
Product Detail
| Feature | Specification |
| Standard | ASTM A328 / EN 10248 / JIS A5528 / GB/T 29737 |
| Grade | ASTM A572 Gr.50 / Q235B / Q345B / SY295 / SY390 / S235JR / S275JR |
| Type | U-Type / Z-Type / Larssen Sheet Piles |
| Manufacturing | Hot-Rolled / Cold-Formed Steel Sheet Pile |
| Length | 6m – 18m (Custom Length Available) |
| Width | 200mm – 900mm (Depending on Profile) |
| Thickness | 4mm – 12mm |
| Surface | Mill Finish / Coated / Hot-Dip Galvanized |
| Ready Stock | 80000+ Tons Available |
| Exported To | Southeast Asia / Middle East / Americas / Europe |
| Delivery | Factory Direct Price, 7–15 Days |
Steel Sheet Pile Chemical Composition
| Standard | Grade | C (%) | Mn (%) | P (%) | S (%) | Si (%) |
|---|---|---|---|---|---|---|
| GB/T 29737 | Q235B | ≤0.22 | ≤1.40 | ≤0.035 | ≤0.035 | ≤0.35 |
| GB/T 29737 | Q345B | ≤0.20 | 1.00–1.60 | ≤0.035 | ≤0.035 | ≤0.50 |
| ASTM | A36 | ≤0.25 | 0.80–1.20 | ≤0.04 | ≤0.05 | 0.15–0.40 |
| ASTM | A572 Gr.50 | ≤0.23 | 0.67–1.65 | ≤0.035 | ≤0.04 | ≤0.50 |
| ASTM | A992 | ≤0.23 | 0.50–1.70 | ≤0.035 | ≤0.045 | ≤0.50 |
| EN 10248 | S235JR | ≤0.17 | ≤1.40 | ≤0.035 | ≤0.035 | ≤0.35 |
| EN 10248 | S275JR | ≤0.22 | ≤1.50 | ≤0.035 | ≤0.035 | ≤0.55 |
| EN 10248 | S355JR | ≤0.22 | ≤1.60 | ≤0.035 | ≤0.035 | ≤0.55 |
| JIS | SY295 | ≤0.22 | 0.50–1.60 | ≤0.035 | ≤0.035 | 0.20–0.35 |
| JIS | SY390 | ≤0.22 | 0.80–1.60 | ≤0.035 | ≤0.035 | 0.20–0.50 |
| JIS | SY490 | ≤0.23 | 0.90–1.60 | ≤0.035 | ≤0.035 | 0.20–0.55 |
Steel Sheet Pile Mechanical Properties
| Standard | Grade | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation (%) | Hardness (HB) |
|---|---|---|---|---|---|
| GB/T 29737 | Q235B | 235 | 370–500 | ≥26 | 120–160 |
| GB/T 29737 | Q345B | 345 | 470–630 | ≥20 | 140–180 |
| ASTM | A36 | 250 | 400–550 | 20 | 119–159 |
| ASTM | A572 Gr.50 | 345 | 450–620 | 18–21 | 140–180 |
| ASTM | A992 | 345 | 450–620 | 18–22 | 140–180 |
| EN 10248 | S235JR | 235 | 360–510 | ≥26 | 120–160 |
| EN 10248 | S275JR | 275 | 430–580 | ≥23 | 130–170 |
| EN 10248 | S355JR | 355 | 470–630 | ≥20 | 140–180 |
| JIS | SY295 | 295 | 430–570 | ≥22 | 130–170 |
| JIS | SY390 | 390 | 520–650 | ≥20 | 140–180 |
| JIS | SY490 | 490 | 560–690 | ≥18 | 150–190 |
Notes:
Yield Strength ReH = Yield Strength
Tensile Strength Rm = Tensile Strength
Elongation A = Elongation (percentage elongation after fracture)
Hardness = Brinell hardness, HB represents Brinell hardness.
sheet pile dimensions
Asia Type Hot Rolled Sheet Piling Types
Europe Larssen sheet pile
Asia Type Hot Rolled Sheet Piling Types
| Section | Dimensions | Sectional Area | Mass | Moment | Modulus | |||
| Width | Height | Thickness | Pile | Wall | of inertia | of section | ||
| w | h | t | ||||||
| mm | Mm | mm | cm2/pile | kg/m | kg/m2 | cm4/m | cm3/m | |
| ⅠA | 400 | 85 | 8 | 45.21 | 35.5 | 88.8 | 4500 | 529 |
| Ⅱ | 400 | 100 | 10.5 | 61.2 | 48 | 120 | 8740 | 874 |
| Ⅲ | 400 | 125 | 13 | 76.4 | 60 | 150 | 16800 | 1340 |
| ⅢA | 400 | 150 | 13.1 | 74.4 | 58.4 | 146 | 22800 | 1520 |
| Ⅳ | 400 | 170 | 15.5 | 97 | 76.1 | 190 | 38600 | 2270 |
| ⅤL | 500 | 200 | 24.3 | 133.8 | 105 | 210 | 63000 | 3150 |
| ⅥL | 500 | 225 | 27.6 | 153 | 120 | 240 | 86000 | 3820 |
| ⅡW | 600 | 130 | 10.3 | 78.7 | 61.8 | 103 | 13000 | 1000 |
| ⅢW | 600 | 180 | 13.4 | 104 | 81.6 | 136 | 32400 | 1800 |
| ⅣW | 600 | 210 | 18 | 135.3 | 106 | 177 | 56700 | 2700 |
| Note: For Asia hot rolled U type sheet pile, most frequently mentioned brand is FSP, NSP, SKSP, JFESP, all mean same sizes. | ||||||||
Europe Larssen sheet pile
| Section | Dimensions | Mass | Moment of inertia | Modulus of section | ||||
| Width | Height | Thickness | Per pile | Wall | ||||
| w | h | t | s | |||||
| mm | mm | mm | mm | kg/m | kg/m2 | cm4/m | cm3/m | |
| 750mm wide | ||||||||
| GHU 14 | 750 | 408 | 10 | 8.3 | 77.9 | 104 | 28 690 | 1 415 |
| GHU 16 | 750 | 411 | 11.5 | 9.3 | 86.3 | 115 | 32 860 | 1 610 |
| GHU 18 | 750 | 441 | 10.5 | 9.1 | 88.5 | 118 | 39 310 | 1 790 |
| GHU 20 | 750 | 444 | 12 | 10 | 96.9 | 129 | 44 450 | 2 010 |
| GHU 23 | 750 | 447 | 13 | 9.5 | 102.1 | 136 | 50 710 | 2 280 |
| GHU 25 | 750 | 450 | 14.5 | 10.2 | 110.4 | 147 | 56 250 | 2 510 |
| 600mm wide | ||||||||
| GHU 12 | 600 | 360 | 9.8 | 9 | 66.1 | 110 | 21 610 | 1 210 |
| GHU 12S | 600 | 360 | 10 | 10 | 71 | 118 | 22 670 | 1 270 |
| GHU 18-1 | 600 | 430 | 10.2 | 8.4 | 72.6 | 121 | 35 960 | 1 680 |
| GHU 18 | 600 | 430 | 11.2 | 9 | 76.9 | 128 | 38 660 | 1 810 |
| GHU 18+1 | 600 | 430 | 12.2 | 9.5 | 81.1 | 135 | 41 330 | 1 930 |
| GHU 22-1 | 600 | 450 | 11.1 | 9 | 81.9 | 137 | 46 390 | 2 070 |
| GHU 22 | 600 | 450 | 12.1 | 9.5 | 86.1 | 144 | 49 470 | 2 210 |
| GHU 22+1 | 600 | 450 | 13.1 | 10 | 90.4 | 151 | 52 520 | 2 345 |
| GHU 28-1 | 600 | 452 | 14.2 | 9.7 | 97.4 | 162 | 60 590 | 2 690 |
| GHU 28 | 600 | 454 | 15.2 | 10.1 | 101.8 | 170 | 64 470 | 2 850 |
| GHU 28+1 | 600 | 456 | 16.2 | 10.5 | 106.2 | 177 | 68 390 | 3 010 |
| GHU 32-1 | 600 | 452 | 18.5 | 10.6 | 109.9 | 183 | 69 220 | 3 075 |
| GHU 32 | 600 | 452 | 19.5 | 11 | 114.1 | 190 | 72 330 | 3 210 |
| GHU 32+1 | 600 | 452 | 20.5 | 11.4 | 118.4 | 197 | 75 410 | 3 350 |
| 600mm and 400mm wide | ||||||||
| GHU 6N | 600 | 309 | 6 | 6 | 41.9 | 70 | 9 680 | 635 |
| GHU 7N | 600 | 310 | 6.5 | 6.4 | 44.1 | 74 | 10 460 | 685 |
| GHU 7S | 600 | 311 | 7.2 | 6.9 | 46.3 | 77 | 11 550 | 750 |
| GHU 7HWS | 600 | 312 | 7.3 | 6.9 | 47.4 | 79 | 11 630 | 755 |
| GHU 8N | 600 | 312 | 7.5 | 7.1 | 48.5 | 81 | 12 020 | 780 |
| GHU 8S | 600 | 313 | 8 | 7.5 | 50.8 | 85 | 12 810 | 830 |
| GHU 10N | 600 | 316 | 9 | 6.8 | 55.8 | 93 | 15 710 | 1000 |
| GHU 11N | 600 | 318 | 10 | 7.4 | 60.2 | 100 | 17 460 | 1 105 |
| GHU 12N | 600 | 320 | 11 | 8 | 64.6 | 108 | 19 230 | 1 230 |
| GHU 13N | 600 | 418 | 9 | 7.4 | 59.9 | 100 | 26 600 | 1 280 |
| GHU 14N | 600 | 420 | 10 | 8 | 64.3 | 107 | 29 420 | 1 410 |
| GHU 15N | 600 | 422 | 11 | 8.6 | 68.7 | 115 | 32 270 | 1 540 |
| GHU 16N | 600 | 430 | 10.2 | 8.4 | 72.6 | 121 | 35 960 | 1 680 |
| GHU 18N | 600 | 430 | 11.2 | 9 | 76.9 | 128 | 38 660 | 1 810 |
| GHU 20N | 600 | 430 | 12.2 | 9.5 | 81.1 | 135 | 41 310 | 1 930 |
| GHU 21N | 600 | 450 | 11.1 | 9 | 81.9 | 137 | 46 390 | 2 070 |
| GHU 22N | 600 | 450 | 12.1 | 9.5 | 86.1 | 144 | 49 470 | 2 210 |
| GHU 23N | 600 | 450 | 13.1 | 10 | 90.4 | 151 | 52 520 | 2 345 |
| GHU 27N | 600 | 452 | 14.2 | 9.7 | 97.4 | 162 | 60 590 | 2 690 |
| GHU 28N | 600 | 454 | 15.2 | 10.1 | 101.8 | 170 | 64 470 | 2 850 |
| GHU 30N | 600 | 456 | 16.2 | 10.5 | 106.2 | 177 | 68 390 | 3 010 |
| GHU 31N | 600 | 452 | 18.5 | 10.6 | 109.9 | 183 | 69 220 | 3 075 |
| GHU 32N | 600 | 452 | 19.5 | 11 | 114.1 | 190 | 72 330 | 3 210 |
| GHU 33N | 600 | 452 | 20.5 | 11.4 | 118.4 | 197 | 75 420 | 3 350 |
| GHU 16-400 | 400 | 290 | 12.7 | 9.4 | 62 | 155 | 22 600 | 1 570 |
| GHU 18-400 | 400 | 292 | 15 | 9.7 | 69.3 | 173 | 26 100 | 1 795 |
| GHL 600 | 600 | 150 | 9.5 | 9.5 | 56.4 | 94 | 3825 | 510 |
| GHL 600K | 600 | 150 | 10 | 10 | 59.4 | 99 | 4050 | 540 |
| GHL 601 | 600 | 310 | 7.5 | 6,4 | 46.8 | 78 | 11520 | 745 |
| GHL 602 | 600 | 310 | 8.2 | 8 | 53.4 | 89 | 12870 | 830 |
| GHL 603 | 600 | 310 | 9.7 | 8.2 | 64.8 | 108 | 18600 | 1200 |
| GHL 603K | 600 | 310 | 10 | 9 | 68.1 | 113.5 | 19220 | 1240 |
| GHL 603 10/10 | 600 | 310 | 10 | 10 | 69.6 | 116 | 19530 | 1260 |
| GHL 604 | 600 | 380 | 10 | 9 | 73.8 | 123 | 30400 | 1600 |
| GHL 605 | 600 | 420 | 13 | 9.2 | 85.5 | 142.5 | 43890 | 2090 |
| GHL 606 | 600 | 435 | 14.4 | 9.2 | 94.2 | 157 | 54375 | 2500 |
| GHL 607 | 600 | 452 | 19 | 10.6 | 114 | 190 | 72320 | 3200 |
| GHL 703 | 700 | 400 | 9.5 | 8 | 67.5 | 96.4 | 24200 | 1210 |
| GHL 716 | 700 | 440 | 10.2 | 9.5 | 79.9 | 114.2 | 35200 | 1600 |
| GHL 720 | 750 | 450 | 12 | 10 | 96.4 | 128.5 | 45000 | 2000 |
sheet pile interlock types
Design: Interlocking Steel Sheet Pile, permeability ≤1×10⁻⁷ cm/s
Americas: Meets ASTM D5887 Standard for a Liner to Reduce Seepage Under Drums
Southeast Asia: Groundwater-seepage proof for tropical rainy seasons
Steel Sheet Pile Production process
1.Raw Material Preparation
The high quality steel billets are well selected and inspected to make sure the chemical composition and quality are up to the standards.
2.Heating up
The billets are heated in a reheating furnace to the rolling temperature (about 1200°C) .
3.Hot Rolling
Hot billets are rolled through a series of rolling mills to produce the Larssen sheet pile profile with uniform dimensions and interlocks.
4.Cooling
The sheet piles produced are cooled under controlled conditions to obtain the required mechanical properties.
5.Straightening & Cutting
They are straightened and cut into standard or customized length.
6.Inspection & Testing
There are dimensional inspection and mechanical test of the products, the Mill Test Certificate (MTC) is provided.
7.Surface Treatment (Optional)
A coating, such as paint, epoxy or galvanizing, can be applied to protect against rust.
Steel Sheet Pile Surface
Americas:HDG as ASTM A123 (min zinc coat ≥ 85 µm); 3PE coating is optional; all finishes RoHS compliant.
Southeast Asia:The thickness of hot dip galvanized is hollyh (over 100μm), and two layers of epoxy coal tar coating are applied, it can be salt sprayed tested for 5000 hours without rust, is the best for tropical marine environment use.
APPLICATION
Marine & Waterfront – Construction of wharves, embankments, and harbor breakwaters to prevent soil erosion.
Flood & Erosion Control – Riverbank protection, flood walls, and coastal protection to resist floods and wave erosion.
Excavation & Construction Support – Excavation pit support, pipeline construction, and underground parking garage or subway construction to ensure soil stability.
Civil Infrastructure – Bridge abutments, road slope protection, and railway subgrade reinforcement.
Industrial & Land Reclamation – Industrial land reclamation, soil contamination containment, and retaining walls for hydraulic engineering projects.
Why Choose China Royal Steel for Steel Sheet Piles
Different types of sections: A number of series with different geometrical profiles, making it possible to select a technically and economically optimal section for each project. Our standard stock of U-type hot rolled sheet piles is more than 80,000 tons.
Great Structural Properties:Deep corrugation and high thickness of the flanges result in excellent load bearing and flexural properties.
Reuse potential: Symmetrical single element design allows high potential of reusability for the future projects.
Improved Installation: Pile can be fabricated and pinned into pairs at the mill for better installation quality and overall performance.
PACKAGING AND SHIPPING
Standard Export Packaging: Steel sheet piles are tightly packed with steel straps and braced to reinforce and prevent deformation in transit.
Anti-Corrosion Protection: Rust-proof oil, plastic wrapping or waterproof packaging can be provided for long distance and marine transportation.
Bespoke Packaging Services: The packaging may be customized to fit the needs of the project, such as special marking, labeling or any protective measures.
Loading Efficiency: Professional loading advice to maximize container space(20GP / 40GP / Bulk vessel) which can lower the freight cost.
Speedy Delivery: There is ready stock for off the shelf delivery within 7-15 days to support for the urgency of a project.
World-Wide Shipping Experience: Rich export experience to South East Asia, Middle East, Americas, Europe, make you peace of mind for logistics and document.
FAQ
1. What types of steel sheet piles do you supply?
We offer U-type (Larssen) and Z-type hot-rolled and cold-formed sheet piles, with various sizes and lengths to suit different projects.
2. What standards do your sheet piles meet?
Our products comply with ASTM, EN, and JIS standards to ensure high quality, strength, and durability.
3. Can sheet piles be reused?
Yes, U-type piles have a symmetrical design, making them highly reusable in multiple projects.
4. What is the typical delivery time?
Standard orders are shipped from our stock of over 80,000 tons, ensuring fast and reliable delivery worldwide.
5. Can you provide technical support for installation?
Yes, we offer professional guidance from section selection to on-site installation, including assembly of pile pairs for improved performance.
Write your message here and send it to us
