Structural Carbon Steel Profile Beam H Iron Beam h Shape Steel Beam for Industry
PRODUCT PRODUCTION PROCESS
The flow of the production of exterior standard H steel is generally as follows:
Preparation of raw materials: The raw material to make H steel is steel billets normally. The steel billet should be cleaned and heated to work and shape.
Pre-treatment: The steel billet, after being heated, is delivered to the hot rolling mill for hot rolling. In the rolling mill, the working rolls are in contact with the FFB at multiple points along the roll length, and the billet is shaped gradually into an H-shaped profile.
Cold working (optional): H-shaped steel after hot rolling h was cold processed, such as cold rolling drawing, etc. to improve the accuracy and surface quality of H-shaped steel.
Cutting and finishing: H-shaped steel rolling cold working rolling cold working of H-type steel production process flow after rolling and cold working H-shaped steel needs to be cut and finished according to the needs of the customer to meet the size and length of special requirements.
Surface treatment: H steel surface is clean and rust proof. Inspection and packing: Carry out quality inspection on the produced H steel such as appearance quality, dimensional precision, mechanical properties etc. Once tested and approved, it is packed and delivered to the customer.
PRODUCT SIZE
| Designation | Unt Weight kg/m) |
Standard Secional imension mm |
Sectional Ama (cm² |
|||||
| W | H | B | 1 | 2 | r | A | ||
| HE28 | AA | 61.3 | 264.0 | 280.0 | 7.0 | 10.0 | 24.0 | 78.02 |
| A | 76.4 | 270.0 | 280.0 | 80 | 13.0 | 24.0 | 97.26 | |
| B | 103 | 280.0 | 280.0 | 10.5 | 18.0 | 24.0 | 131.4 | |
| M | 189 | 310.0 | 288.0 | 18.5 | 33.0 | 24.0 | 240.2 | |
| HE300 | AA | 69.8 | 283.0 | 300.0 | 7.5 | 10.5 | 27.0 | 88.91 |
| A | 88.3 | 200.0 | 300.0 | 85 | 14.0 | 27.0 | 112.5 | |
| B | 117 | 300.0 | 300.0 | 11.0 | 19.0 | 27.0 | 149.1 | |
| M | 238 | 340.0 | 310.0 | 21.0 | 39.0 | 27.0 | 303.1 | |
| HE320 | AA | 74.3 | 301.0 | 300.0 | 80 | 11.0 | 27.0 | 94.58 |
| A | 97.7 | 310.0 | 300.0 | 9.0 | 15.5 | 27.0 | 124.4 | |
| B | 127 | 320.0 | 300.0 | 11.5 | 20.5 | 27.0 | 161.3 | |
| M | 245 | 359.0 | 309.0 | 21.0 | 40.0 | 27.0 | 312.0 | |
| HE340 | AA | 78.9 | 320.0 | 300.0 | 85 | 11.5 | 27.0 | 100.5 |
| A | 105 | 330.0 | 300.0 | 9.5 | 16.5 | 27.0 | 133.5 | |
| B | 134 | 340.0 | 300.0 | 12.0 | 21.5 | 27.0 | 170.9 | |
| M | 248 | 377.0 | 309.0 | 21.0 | 40.0 | 27.0 | 315.8 | |
| HE360 | AA | 83.7 | 339.0 | 300.0 | 9.0 | t2.0 | 27.0 | 106.6 |
| A | 112 | 350.0 | 300.0 | 10.0 | 17.5 | 27.0 | 142.8 | |
| B | 142 | 360.0 | 300.0 | 12.5 | 22.5 | 27.0 | 180.6 | |
| M | 250 | 395.0 | 308.0 | 21.0 | 40.0 | 27.0 | 318.8 | |
| HE400 | AA | 92.4 | 3780 | 300.0 | 9.5 | 13.0 | 27.0 | 117.7 |
| A | 125 | 390.0 | 300.0 | 11.0 | 19.0 | 27.0 | 159.0 | |
| B | 155 | 400.0 | 300.0 | 13.5 | 24.0 | 27.0 | 197.8 | |
| M | 256 | 4320 | 307.0 | 21.0 | 40.0 | 27.0 | 325.8 | |
| HE450 | AA | 99.8 | 425.0 | 300.0 | 10.0 | 13.5 | 27.0 | 127.1 |
| A | 140 | 440.0 | 300.0 | 11.5 | 21.0 | 27.0 | 178.0 | |
| B | 171 | 450.0 | 300.0 | 14.0 | 26.0 | 27.0 | 218.0 | |
| M | 263 | 4780 | 307.0 | 21.0 | 40.0 | 27.0 | 335.4 | |
| Designatio | Unit Weight kg/m) |
Standad Sectional Dimersion (mm) |
Sectiona Area (cm²) |
|||||
| W | H | B | 1 | 2 | r | A | ||
| HE50 | AA | 107 | 472.0 | 300.0 | 10.5 | 14.0 | 27.0 | 136.9 |
| A | 155 | 490.0 | 300.0 | t2.0 | 23.0 | 27.0 | 197.5 | |
| B | 187 | 500.0 | 300.0 | 14.5 | 28.0 | 27.0 | 238.6 | |
| M | 270 | 524.0 | 306.0 | 21.0 | 40.0 | 27.0 | 344.3 | |
| HE550 | AA | t20 | 522.0 | 300.0 | 11.5 | 15.0 | 27.0 | 152.8 |
| A | 166 | 540.0 | 300.0 | t2.5 | 24.0 | 27.0 | 211.8 | |
| B | 199 | 550.0 | 300.0 | 15.0 | 29.0 | 27.0 | 254.1 | |
| M | 278 | 572.0 | 306.0 | 21.0 | 40.0 | 27.0 | 354.4 | |
| HE60 | AA | t29 | 571.0 | 300.0 | t2.0 | 15.5 | 27.0 | 164.1 |
| A | 178 | 500.0 | 300.0 | 13.0 | 25.0 | 27.0 | 226.5 | |
| B | 212 | 600.0 | 300.0 | 15.5 | 30.0 | 27.0 | 270.0 | |
| M | 286 | 620.0 | 305.0 | 21.0 | 40.0 | 27.0 | 363.7 | |
| HE650 | AA | 138 | 620.0 | 300.0 | t2.5 | 16.0 | 27.0 | 175.8 |
| A | 190 | 640.0 | 300.0 | t3.5 | 26.0 | 27.0 | 241.6 | |
| B | 225 | 660.0 | 300.0 | 16.0 | 31.0 | 27.0 | 286.3 | |
| M | 293 | 668.0 | 305.0 | 21.0 | 40.0 | 27.0 | 373.7 | |
| HE700 | AA | 150 | 670.0 | 300.0 | 13.0 | 17.0 | 27.0 | 190.9 |
| A | 204 | 600.0 | 300.0 | 14.5 | 27.0 | 27.0 | 260.5 | |
| B | 241 | 700.0 | 300.0 | 17.0 | 32.0 | 27.0 | 306.4 | |
| M | 301 | 716.0 | 304.0 | 21.0 | 40.0 | 27.0 | 383.0 | |
| HE800 | AA | 172 | 770.0 | 300.0 | 14.0 | 18.0 | 30.0 | 218.5 |
| A | 224 | 790.0 | 300.0 | 15.0 | 28.0 | 30.0 | 285.8 | |
| B | 262 | 800.0 | 300.0 | 17.5 | 33.0 | 30.0 | 334.2 | |
| M | 317 | 814.0 | 303.0 | 21.0 | 40.0 | 30.0 | 404.3 | |
| HE800 | AA | 198 | 870.0 | 300.0 | 15.0 | 20.0 | 30.0 | 252.2 |
| A | 252 | 800.0 | 300.0 | 16.0 | 30.0 | 30.0 | 320.5 | |
| B | 291 | 900.0 | 300.0 | 18.5 | 35.0 | 30.0 | 371.3 | |
| M | 333 | 910.0 | 302.0 | 21.0 | 40.0 | 30.0 | 423.6 | |
| HEB1000 | AA | 222 | 970.0 | 300.0 | 16.0 | 21.0 | 30.0 | 282.2 |
| A | 272 | 0.0 | 300.0 | 16.5 | 31.0 | 30.0 | 346.8 | |
| B | 314 | 1000.0 | 300.0 | 19.0 | 36.0 | 30.0 | 400.0 | |
| M | 349 | 1008 | 302.0 | 21.0 | 40.0 | 30.0 | 444.2 | |
EN H-Shaped Steel
Grade: EN10034:1997 EN10163-3：2004
Specification:HEA HEB and HEM
Standard: EN
FEATURES
High strength: The structural design of H-shaped steel ensures high bending strength and bearing capacity. It is applicable to widely spanning and heavy loading structures.
Good stability: The cross section of H-beam gives it good stability under the axial compression and tension, which favors the stability of and safety of structure.
Convenient construction: H-sectional steel can be connected face to face and installed conveniently during construction, which is favorable to the construction progress and construction efficiency of the project.
High resource utilization: The design of H-shaped steel can utilize the performance of steel completely, eliminating the waste of material, and contributing to the saving of resource and protection of environment.
Broad application: H steel is suitable for all kinds of building, bridge and machinery manufacturing and so on, with good developing prospect.
Scope of application: In general, the external standard H section steel has high strength, good stability, easy construction. It is a kind of key structural steel product and is widely used in all sorts of engineering fields.
PRODUCT INSPECTION
The requirements for H-shaped steel inspection mainly include the following aspects:
Appearance quality: The appearance quality of H-shaped steel should comply with relevant standards and ordering requirements. The surface should be smooth and flat, without obvious dents, scratches, rust and other defects.
Geometric dimensions: The length, width, height, web thickness, flange thickness and other dimensions of H-shaped steel should comply with relevant standards and ordering requirements.
Curvature: The curvature of H-shaped steel should comply with relevant standards and ordering requirements. It can be detected by measuring whether the planes at both ends of the H-shaped steel are parallel or using a bending meter.
Twist: The twist of H-shaped steel should comply with relevant standards and ordering requirements. It can be detected by measuring whether the side of the H-shaped steel is vertical or with a twist meter.
Weight deviation: The weight of H-shaped steel should comply with relevant standards and ordering requirements. Weight deviations can be detected by weighing.
Chemical composition: If H-shaped steel needs to be welded or otherwise processed, its chemical composition should comply with relevant standards and ordering requirements.
Mechanical properties: The mechanical properties of H-shaped steel should comply with relevant standards and ordering requirements, including tensile strength, yield point, elongation and other indicators.
Non-destructive testing: If H-shaped steel requires non-destructive testing, it should be tested in accordance with relevant standards and ordering requirements to ensure that its internal quality is good.
Packaging and marking: The packaging and marking of H-shaped steel should comply with relevant standards and ordering requirements to facilitate transportation and storage.
In short, the above requirements should be fully considered when inspecting H-shaped steel to ensure that its quality meets relevant standards and ordering requirements, and to provide users with the best H-shaped steel products.
PRODUCT APPLICATION
External standard H-beams are widely used in the construction and engineering fields, including but not limited to the following aspects:
Structural engineering, bridge engineering, machinery manufacturing, shipbuilding, steel structure construction,
PACKAGING AND SHIPPING
The packaging and shipment of the external normal H-beam is as follows:
Packing: H type steel will be packed as per your request for surface prevent damaged. The surface of the H profile steel should not be scratched or corroded in the packing.
Labeling: Clearly mark the product information on the packaging such as model, specifications, quantity, etc for easy identification and management.
Loading: Packaged H Steel Beam when packing into a container, do not allow to be smashed and collision during loading and transportation.
Transportation: Select right transportation tools, such as trucks, railway transportation, etc. according to your requirements and the distance.
Unloading: When H-beams reach destination, the unloading is to be performed carefully to prevent H shape steel beam from damaging.
Storage: Keep H-shape steel in a dry and ventilated place, avoid its being wet or suffered from other adverse effects.
COMPANY STRENGTH
FAQ
1.How can I get a quotation from you ?
You can leave us message, and we will reply every message in time.
2.Will you delivery the goods on time?
Yes,we promise to provide best quality products and delivery on time. Honesty is our company's tenet.
3.Can I get samples before order ?
Yes, of course. Usually our samples are free,we can produce by your samples or technical drawings.
4.What is your payment terms?
Our usual payment term is 30% deposit, and rest against B/L. EXW, FOB,CFR, CIF.
5.Do you accept the third party inspection?
Yes absolutely we accept.
6.How do we trust your company?
We specialise in steel business for years as golden supplier, headquarter locates in Tianjin province, welcome to investigate in any ways, by all means.
Products categories
-
Preservative Steel Q235 Q345 A36 A572 Grade HEA...
-
Factory Price ASTM Hot Dipped Zinc Galvanized A...
-
H Beam ASTM A36 Hot Rolled Welding Universal Be...
-
HEA HEB H Beam Profile Structural Carbon Steel ...
-
EN High Quality Standard Size H-shaped Steel Beam
-
High Quality h16 x 101 150x150x7x10 Q235 Q345b ...